Monday 20 August 2012

RFnode 1.3

I received some of the PCBs for the new version of my RFnode so I spent a little time today soldering it all together and testing it out. 

This version of the board has following features.

+RGB led (on PWM pins D5, D6, D10) now can make any color.
+CR2032 lithium coin battery powered or USB powered
+Power selector switch to select between USB power and battery(CR2032)
+USnooBie compatible (http://www.frank-zhao.com/usnoobie/
+Programmable via mini USB port (USBISP) and supports the Arduino IDE (USnooBie bootloader)
+nRF24L01+ 2.4Ghz radio transceiver 
+3.3 Volts @ 12Mhz (onboard voltage regulator)
+Breadboard friendly if you add the header (even mini breadboard)
+Only 46x24mm board size 
+SMD parts (to keep testing my soldering skills)


All assembled with radio and breadboard header, ready to go 


With CR2032 battery 

In mini breadboard, without radio attached

3 comments:

  1. Replies
    1. Message me, This is an older version of the board but I might have a few left. As a heads up some of the components are not easy to solder by hand.

      Delete